Lift the motherboard out of the lower case. If you are installing a new motherboard, make sure to transfer any remaining cables onto the new motherboard, as well as the CPU, RAM, modem, and Wi-Fi card. All title and intellectual property rights in and to Software are owned and retained by the manufacturer or owner of the Software. Learn how to install and replace the laptop Motherboard on a Dell Inspiron N5030 laptop.
You may find corresponding source files for the Software at , or at such other locations indicated by Dell.EXPORTYou are advised that the Software is subject to U.S. export laws as well as the laws of the country where it is delivered or used. Use a spudger to pull the touch pad connector latch towards the ribbon cable. This how-to guide shows the removal and installation of the Bottom Base on the Dell Inspiron 14R-N4010 (P11G-001). A small Phillips head screwdriver and a plastic scribe is needed for this repair.
You will then be prompted for your language, time and currency format and keyboard settings. If you use an English .iso it’ll be set by default to US English: Mine are all set to the united Kingdom (proper English) as shown below, amend for your own preferences. Remove the two 5.75 mm Phillips #1 screws securing the keyboard to the laptop. The screw holes will be denoted by an embossed «D» by the hole. Unscrew the single screw holding the DC charger board into the laptop and lift it out.